Showing posts with label Sculpture. Show all posts
Showing posts with label Sculpture. Show all posts

Sunday, October 30, 2016

Collage, Cypress Gallery Fall Show

This is a collage I entered in the Fall Show at the Cypress Gallery here in Lompoc.
It got the blue ribbon in the 3-D category.  (have to admit-there were not very many entries in that category this time).  The title of the piece is "Under The Sun". To me, it shows commonality co-existing with diversity: unique content, all encircled.  Never mind, philosophy aside, it was fun to put together, using odds and ends I'd saved.  The size is 24x24 inches- a friend gave me the frame. It has glass-there are reflections in the right hand corner.  There is just half an inch clearance for the items.


Thursday, October 16, 2014

Halloween, and more

I should post this on Facebook for a "Throwback Thursday picture", because it's a painting I did back in 1969. The brown canvas was left by some movers, and I just used white acrylic. It's life size- too bad it wasn't a longer piece- she would have had complete legs!


These ghosts are about 10-11 inches tall...scary, eh? 


A few of these are at the Cypress Gallery in Lompoc. In actuality the cutouts appear dark, but the camera flash lit up the insides.

This is a 19" stoneware platter, on display this month at the Cypress Gallery. I called it "Spinning"

Monday, July 07, 2014

Frosty

This is the figure I was commissioned to make copies of. It is a family heirloom, and the owner wanted duplicates (or close) to give to his children. It is a luminary (no top to the hat) about 8" tall.

Here are the ones I made, of thrown and altered spheres. It's really harder to copy something than just start with your own design. Of course, if you're making multiples of your own design, that's copying too. I don't often do that, unless it's dinnerware, etc.

I'm including the side view photo to show the shaping of the body, indicating their big butts-adds to their cuteness. They all have scarfs hanging down the back, too.

Saturday, July 05, 2014

Worm tower.

This is about 22 inches tall; it is a worm tower I made at the request of a customer...never had heard of such a thing before! It will be buried in her garden to a point past the holes, (it has no bottom), then she will keep adding kitchen scraps. As they compost, the worms come to the holes, feed and digest, etc, improving the soil.  She had seen them made of PVC pipes, but wanted something more organic looking, also somewhat absorbent. I don't have earthenware on hand at the moment, so used a buff stoneware, textured with a press mold I have, added a stain and fired it to bisque temp. only 

For any interested potters, this illustrates what I used to make the worm tower: I wrapped linoleum around my coffee can form, then several layers of paper to allow room for the clay to shrink. I made a big slab, wrapped and joined it, then applied texture. My little bark press mold was made from a jacaranda tree.  The lid was the last thing. It exactly fit into my Skutt 1027 after it was dry.


Rotations

This is a stoneware piece I think of as a 3-D Yin/Yang It is made of 2 discs, cut to the middle and joined.
This piece, about the same diameter as the ceramic one above, is made of soft copper tubing.


Sunday, June 29, 2014

I made 10 of these last fall, still have a few left. I had bought the wooden trays for almost nothing at a thrift shop, and thought they would be perfect for adding tiles....trying different textures.

A long time customer ordered this; it's about 9" in diameter

These are bowls I made for the local "Empty bowls project", plus some experimental eggs.

I made these nests in March, to be used as candy dishes at our granddaughter's wedding reception. The decorations were bird-themed: mini birdhouses on the tables, etc. These nests are about 8" in diameter. I bisque-fired a lot of little sticks first, then shaped the nests of stoneware clay, and after they were partly firm, poked the "twigs" into the clay. The colors are not all glaze; I had to enhance with acrylics. 

Thursday, June 14, 2012



Our show opened on June 10, in the Centano Gallery at the Lompoc Museum. It will be on display for 2 months.
Here are some pictures I took the day of the reception

L to R: works by Eric Morlan, Carol Moore, Peggy Kizziah

by Carol Moore, Ann Brink (my collage is interactive; several pieces can slide on steel rods

by Dee Frasher

by Ron Barrows

by Dee Frasher

Double walled vessel, and basket w/ copper tubing handle, by Ann Brink

by Eric Morlan

Top to Bottom: pieces by Noreen LaPointe, Ann Brink,  Ed Brooks

Mobile by Carol Moore

by Ed Brooks and vases by Noreen LaPointe

Stone carvings by Ken Jorgensen

by Dee Frasher

by Ann Brink











by Ann Brink



by Eric Morlan and Ken Jorgensen



by Noreen LaPointe





by Carol Moore
by Dee Frasher

by Dee Frasher

by Ed Brooks

by Carol Moore




Friday, May 18, 2012

This sculpture was made from one thrown disc, which was cut into rings, which were then carefully bent.  I made it quite a long time ago, but left the pieces separate.  I like to have them all on a table and set them all to rocking at once, if possible. Being of differing sizes, they were always stopping and had to be restarted- kind of fun!  But for a change, this spring I decided to fasten them together using fishing swivels secured by black coated wire. They can all be easily turned other directions, but I was interested to find out that when the piece is hanging where the wind moves it slightly, the natural position is perfectly lined up in the same direction.

May 14th 2012 glaze firing

Two bowls and a small plate. The large bowl and the plate have the same creme glaze on them, but the bowl is made of a buff clay. Quite a difference.  The spots are from added grains of volcanic material.


 I intended to put cup handles on all these, but changed my mind.  They are just 5" front to back and almost that tall.




 I took this picture before the handle is glued in. Now I'm thinking of making the handle of some copper tubing instead, not sure.
 A 13" bowl.
 A double walled carved and pierced vase, only about 9" in diameter. It was thrown upside down.
Here's something to show I don't post only the successful pots!  This is a wall sculpture about 13" in diameter that I accidentally broke while cleaning up the glaze: (see the cracked spots?) I made 2 clay shims and placed them so as to keep the section upright, and fired it anyway. It won't go into the upcoming show at the museum, but I'll hang it here to remind me to try again.
 These are for some friends' beach house- they will be mounted all in one row on a weathered driftwood plank they found. Perspective is off here because the 1145 is vertical and the rest horizontal in the picture.
 These 2 plates are for a friend who ordered them- she likes to do easy-bake dinners on them. I need to get some lessons on that.

Tuesday, September 21, 2010

These two necklaces feature scales from a redfish! (red drum) Our friend in Houston sent them to me a while ago, and I just recently finally figured out a design that works well, I think. I'll make more if he sends more scales. They are not brittle, but tough like a fingernail- I noticed this when drilling the holes.


The series of pictures following are of works by the Lompoc Sculptors Guild. We have a show at the Grossman Gallery in Lompoc, during September.

A work in metal, by Ron Barrows


Noreen LaPointe made this ceramic piece.



These two are also by Noreen LaPointe



Small tiles by Noreen LaPointe, other one by Dee Frasher





Noreen did the tiles & sculpture on the left, Carol S. Moore created the shrunken wool fantasy pieces in the middle, and the ceramic basket with weaving is by Dee Frasher.



Noreen LaPointe's clay dragon and dog, Dee Frasher's four pieces






A bas-relief by Peggy Kizziah.




From top left, clockwise: an aluminum sculpture by Eric Morlan, a welded metal piece by Ron Barrows, a bisque sculpture by Peggy Kizziah, and a stoneware bowl-mine.



Our show is named "Art in the Making", and the idea was to show process as well as finished product. Here Eric Morlan shows the maquette he made in planning this aluminum sculpture.



Two pieces by Dee Frasher, and another knitted creature by Carol S. Moore.



A ceramic grouping by Dee Frasher, and a work in progress by Eric Morlan, with maquette.



This is Dee Frashers explanatory panel showing the process of her work with gourds.



Dee Frasher, Carol S. Moore, and Noreen LaPointe



a styrofoam (mostly) piece by Carol S. Moore, and a 13" tile with purple shapes, by me. (it looked better raw, before glazing and firing, haha!)



My large platter, pictured in an earlier post.



This altered disc is alson on a 12" tile.